Check the listing for details. 4pcs Gigabit Active PoE Splitter 5V Micro USB Raspberry Pi 3B Plus Jetson Nano. Condition: New. Listed at 41.79 USD. 4pcs Gigabit Ethernet Active PoE Splitter Micro USB Plug for Jetson Nano Raspberry Pi 3B+(3B Plus) ASUS Tinker Development Board 48V to 5V 2.4A (Max. 12watt) Compliant with IEEE802.3af With 2.5KV isolation Note: This POE splitter must be connected with POE Switch or 48V POE Injector so that it can supply power to a connected Raspberry Pi or other Micro USB Port IN DC 5V cameras: Compatible IEEE 802.3af/802.3at standard POE switches(safty power supply): 8 Ports Ethernet Gigabit 8 PoE Switch 120W 802.3af: http://www.ebay.com/itm/201396693014 5 Ports Ethernet Gigabit PoE Switch 4 PoE IEEE802.3af: http://www.ebay.com/itm/191632746362 Note: this POE Splitter is also suitable for household IP camera and mobile router with Micro USB Plug 5V power Port. Power Output Port: Micro USB Power Plug RJ45 female INPUT Port: Support the IEEE 802.3af the Power over Ethernet PoE Switch Support 48V Unsolicited Power Over Ethernet PoE Switch Support 48V Unsolicited Power Over Ethernet PoE Adapter Specification: Compliant with IEEE802.3af Isolation: 2.5kV Power Input: DC44~57V Power Output: DC5V 2.4A Data&Power INPUT Port: from RJ45 female (Compliant with IEEE802.3af/at PoE) Data Output Port: RJ45 Male Power Output Port: Micro USB Power Plug Data Transfer Rate: 10/100/1000 Mbps Devices will be detected before poe input Power Pin:support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-) Body size: 80 x 27x 22 mm DC cable length：165mm RJ45 Modular Plug cable length：155mm Weight : 55g Operation Temperatue:-20℃ ~ 45℃ Storage Temperature:-30℃ ~ 70℃ Notice: Some managed intelligent Gigabit PoE switches need to set the LAN port of this connected splitter to Manual 100Mb/s mode in the management Settings of switches, otherwise the power supply may work normally but the network connection will not work, such as the following switch, HP 3500-48G-PoE yl Switch (J8693A) Notice: Yellow LED(power) will be light up when micro USB connects to the device. Green LED(data) never light in any circumstances,two reasons are below, 1.This splitter allows data to input and output through its RJ45 port, but no indicator on this splitter indicates the status of the data transfer. Only one power indicator shows the working status of the POE. 2.due to the cost problem,the network interface component is from the universal components which own two LEDs on the market. Item Included: 10/100/1000Mbps 48V to 5V Active PoE Splitter(Micro USB Power Plug) x4