Check the listing for details. 【Buy 6 Get 4 Free,Add 10】ELEGOO PLA+ 3D Printer Material Filament for FDM Printe. Condition: New. Listed at 20.59 USD. 【Higher Toughness & Impact Strength】Toughness and impact strength of ELEGOO PLA Plus is apparently enhanced. It’s also low warpage and shrinkage, bringing excellent results for printing functional parts or other projects. 【Less-tangle & Neatly Wound】Full mechanical winding and strict manual inspection ensures that all pla+ filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues. 【Top-Notch Accuracy & Consistent】Precise production process guarantee ELEGOO PLA Plus filament of 1.75mm diameter, accuracy of +/- 0.02mm. 【No Clogging & No Bubbles】Complete dried before packing and well vacuum sealed protect the filaments from moisture and dust,no clogging and bubbling. Perfectly compatible with most 1.75mm FDM 3D printers on the market. PLA+ FILAMENT Specially Design for 3D Printing Technical Specifications Density: 1.25g/Cm³ Melt Index: 10(190°C/2.16kg)g/10min Tensile Strength（X-Y): ≥ 60mpa Elongation At Break（X-Y): 23% Bending Strength:80mpa Bending Modulus:1911mpa Charpy Impact Strength:9j/M² Thermal Deformation Temp: 53°C(0.45mpa) Fan: 100% Line Length: (1.75mm) 330-335m Rockwell Hardness: 88 Print Layer Thickness: 0.2mm Recommended Extrusion/Nozzle Temp: 200~230°C(Recommended 215°C) Recommended Heated Bed Temp: 50-65°C Printing Speed: 30-70mm/S Recommendation Platform: PEI/Glass/Fiberglass Board+Pvp Glue Stick Or Textured Paper