Check the listing for details. Chief RPA357 Ceiling Projector Mount, Black. Condition: New. Listed at 140.00 USD. Chief RPA357 Ceiling Projector Mount, Black Used – Open Box: The item is in perfect working condition with minor damage possible, or without original protective wrapping. No hardware is included. The Chief Custom RPA 357 Series Projector Mount is designed to fit an EPSON PowerLite Home Cinema or an EPSON PowerLite Pro Cinema projector, for a quick and easy install. See compatibility list below. The Custom RPA offers three options for attaching to the ceiling: mount it flush, with a 1/4" threaded rod, or with a 1-1/2" NPT column. The mount can support up to 50 lbs. and features hollow channels to keep cables out of sight. FEATURES Supports up to 50 lbs. Independent roll, pitch and yaw for quick and precise projector registration Quick connect/disconnect for convenient lamp and filter access on most projectors Maintains registration when disconnected and doesn't affect preset adjustments All-Points Security exclusive steel-into-steel locking hardware at all key connection points to protect against theft Multiple installation options: flush mount to ceiling, mount with 0.25" threaded rods, or mount with 1.5" NPT threaded extension column Cable management without additional accessories Note: This mount requires a ceiling plate and a threaded column for installation. Hardware not included. COMPATIBILITY EPSON Projectors PowerLite Home Cinema 4000 PowerLite Home Cinema 4010 PowerLite Home Cinema 5040UB & 5040UBe PowerLite Home Cinema 5050UB & 5050UBe PowerLite Home Cinema 6040UB & 6040UBe PowerLite Pro Cinema 4040 PowerLite Pro Cinema 4050 PowerLite Pro Cinema 6040UB PowerLite Pro Cinema 6050UB EH-TW7300 EH-TW7400 EH-TW8300 & EH-TW8300W EH-TW8400 & EH-TW8400W EH-TW9300 & EH-TW9300W EH-TW9400 & EH-TW9400W SPECIFICATIONS Adjustments Roll: 4° Pitch: 25° Yaw: 360°, 12° on flush mount Certifications: UL Listed Color: Black Product Weight: 5.0 lbs (2.27 kg) Solution Type: Custom Weight Capacity: 50 lbs (22.7 kg) NOTE: DOES NOT INCLUDE MOUNTING HARDWARE Hardware needed, but not included SLB-357 interface bracket Two M5 x 10mm counter-sunk screws Four M5 x 10mm pan-head screws Nine M4 x 10mm philips-head screws Nine M4 x 10mm hex-head screws Threaded-post 9 Washers 6 Nuts 2 Hex-keys