| All returns accepted | ReturnsNotAccepted |
|---|---|
| Type | Ethernet Switch |
| Model | Cisco WS-C2960S-48LPS-L |
| Interface | SFP |
| Network Management Type | Fully Managed |
| MPN | WS-C2960S-48LPS-L |
| Network Connectivity | Wired-Ethernet (RJ-45) |
| Brand | Cisco |
| Number of LAN Ports | 48 |
| MPN | WSC2960S48LPSL |
Check the listing for details. Cisco WS-C2960S-48LPS-L 48 Port PoE Gigabit Ethernet Stackable Switch 4 SFP. Condition: Used. Listed at 69.99 USD. PRODUCT FEATURES * Efficient switch operation Cisco Catalyst 2960S Series Switches, designed and engineered by Cisco, provide optimum power saving, low power operations for industry best-in-class power management, and power consumption capabilities. The Cisco Catalyst 2960S ports are capable of reduced power modes so that ports not in use can move into a lower power utilization state. * Intelligent Power over Ethernet management The Cisco Catalyst 2960S PoE models support the PoE+ devices including Cisco IP phones and Cisco Aironet WLAN access points providing up to 30W of power per port, as well as any IEEE 802.3af-compliant end device. * Enhanced quality of service The Cisco Catalyst 2960S Series Switches offers intelligent services that keep everything flowing smoothly. Industry-leading mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. PRODUCT DETAILS Device TypeSwitch – 48 ports – Managed Enclosure TypeRack-mountable 1U SubtypeGigabit Ethernet Ports48 x 10/100/1000 (PoE) + 4 x SFP Power Over Ethernet (PoE)PoE PerformanceSwitching capacity : 176 Gbps Forwarding performance (64-byte packet size) : 77.4 Mpps MAC Address Table Size8K entries Remote Management ProtocolSNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH FeaturesLayer 2 switching, auto-sensing per device, dynamic IP address assignment , power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), PoE+, Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN) Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at PowerAC 120/230 V ( 50/60 Hz ) Dimensions (WxDxH)44.5 cm x 38.6 cm x 4.5 cm Weight5.77 kg GENERAL Device TypeSwitch – 48 ports – Managed Enclosure TypeRack-mountable – 1U SubtypeGigabit Ethernet Ports48 x 10/100/1000 (PoE) + 4 x SFP Power Over Ethernet (PoE)PoE PerformanceSwitching capacity : 176 Gbps Forwarding performance (64-byte packet size) : 77.4 Mpps MAC Address Table Size8K entries Remote Management ProtocolSNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH Encryption AlgorithmSSL Authentication MethodSecure Shell (SSH), RADIUS, TACACS+ FeaturesLayer 2 switching, auto-sensing per device, dynamic IP address assignment , power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), PoE+, Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN) Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP), IEEE 802.3at RAM128 MB Flash Memory64 MB Flash Status IndicatorsPort status, link activity, port transmission speed, port duplex mode, power, system DIMENSIONS & WEIGHT Width44.5 cm Depth38.6 cm Height4.5 cm Weight5.77 kg MISCELLANEOUS Rack Mounting KitOptional MTBF205,052 hours Compliant StandardsTUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, VCCI Class A ITE, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C22.2 No. 60950-1, FCC Part 15 B Class A POWER Power DeviceInternal power supply Voltage RequiredAC 120/230 V ( 50/60 Hz ) Power Consumption Operational71 Watt ENVIRONMENTAL PARAMETERS Min Operating Temperature-5 °C Max Operating Temperature40 °C Humidity Range Operating10 – 95% (non-condensing) Min Storage Temperature-25 °C Max Storage Temperature70 °C Humidity Range Storage10 – 95% (non-condensing) EXPANSION / CONNECTIVITY Interfaces48\x 10Base-T/100Base-TX/1000Base-T – RJ-45 – PoE 1 x USB – Type A 1 x console – mini-USB Type B – management 1 x console – RJ-45 – management 1 x 10Base-T/100Base-TX – RJ-45 – management 4 x SFP (mini-GBIC) Expansion Slots1 (total) / 1 (free) x Stacking Module