Check the listing for details. Crestron HD-MD-400-C-E HD Scaling Auto-Switcher and Receiver. Color: Black, Condition: Used. Listed at 25.00 USD. HD-MD-400-C-EDM Lite – HD Scaling Auto-Switcher & HDMI® over CATx Extender 400DiscontinuedThis product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.For a substitute, see HD-MD-400-C-E KIT.Provides a simple and cost-effective high-definition AV presentation solution for classrooms and meeting spaces. It is composed of a DM Lite surface mount transmitter (HD-TX-301-C-E) and receiver (HD-RX-201-C-E), which connect together over a single CATx cable at up to 230 ft (70 m). Provides auto-switching HDMI® and VGA inputs at the transmitter, and one additional HDMI input at the receiver. Built-in scaling ensures a reliable, high-quality video image. Fully-automatic operation and web browser setup eliminate the need for a control panel, control system, or programming.Have a question?Resources+ Specifications+ Downloads & documentationFind a DealerOVERVIEWSPECIFICATIONSRESOURCESMODELS & ACCESSORIES"); background-size: 9px 6px; background-position: right -1rem center; background-origin: content-box; background-repeat: no-repeat; max-width: 300px; display: none !important;"> Overview Specifications Resources Models VideoSwitcher3x1+1 (3 inputs at transmitter + 1 input at receiver) manual or auto-switching, audio-follow-video, Crestron QuickSwitch HD technologyScalerHD video scaler and deinterlacer, noise reduction, 3:2/2:2 pull-down detection and recovery, aspect ratio selection, VGA phase/clock & H/V position adjustments, picture and RGB color adjustmentsInput Signal TypesHDMI w/Deep Color (DVI & Dual-Mode DisplayPort compatible [3]); VGA/RGB (RGBHV, RGBS, RGsB); component (YPbPr) [4]Output Signal TypesHDMI w/Deep Color (DVI compatible [6])Copy ProtectionHDCP 1.4Maximum Input ResolutionsInput TypeScan TypeResolutionFrame RateHDMIProgressive1920x1200 WUXGA60 Hz1920x1080 HD 1080p60 HzInterlaced1920x1080 HD 1080i30 HzVGA/RGBProgressive1600x1200 UXGA60 Hz1920x1200 WUXGA60 HzComponentProgressive1920x1080 HD 1080p60 HzInterlaced1920x1080 HD 1080i30 HzNOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 165 MHzScaler Output Resolutions, HDMI, ProgressiveAuto, 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 840x480@60Hz, 1024x768@60Hz, 1280x720@50/60Hz (720p50/60), 1280x768@60Hz [12], 1280x800@60Hz [12], 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz [12], 1400x1050@60Hz [12], 1440x900@60Hz [12], 1600x900@60Hz [13], 1600x1200@60Hz, 1680x1050@60Hz [12], 1920x1080@30/50/60Hz (1080p30/50/60), 1920x1200@60Hz [13]Scaler Output Resolutions, HDMI, InterlacedAuto, 480i, 576i, 1080i25, 1080i30AudioInput Signal TypesHDMI (Dual-Mode DisplayPort compatible [3]), analog stereoOutput Signal TypesHDMI, analog stereo [7]Digital FormatsDolby Digital, Dolby Digital EX, DTS, DTS ES, DTS 96/24, LPCM up to 8 channelsAnalog FormatsStereo 2-channel [7]Analog-To-Digital Conversion24-bit 48 kHzDigital-To-Analog Conversion24-bit 48 kHzAnalog Output Volume-80 to +20 dB Level adjustment range, plus MuteAnalog Output Lip-Sync Delay0 to 150 ms (maximum delay time is reduced for input signals with sampling rates over 48 kHz)Analog PerformanceFrequency Response: 20 Hz to 20 kHz ±0.5 dB;S/N Ratio: >93 dB, 20 Hz to 20 kHz A-weighted;THD+N: 80 dBCommunicationsEthernet10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, web browser setup and control, Crestron control system integrationUSBSupports a TT-100 series cable caddy at the transmitter [2]RS-2322-way device control and monitoring up to 115.2k baud with hardware and software handshakingIR1-way device control via infrared up to 60 kHzHDMIHDCP 1.4, EDID, CECDM Lite LinkProprietary link for connection between TX & RX onlyNOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devices and a control systemConnectors at Transmitter (HD-TX-301-C-E)HDMI 1 – 2 INPUT(2) HDMI Type A connectors, female;HDMI digital video/audio inputs (DVI & Dual-Mode DisplayPort compatible [3])VGA 3 INPUT(1) HD15 connector, female;RGB (VGA) or component video input [4];Formats: RGBHV, RGBS, RGsB, YPbPrAUDIO INPUT(1) 3.5 mm TRS mini phone jack;Unbalanced stereo line-level audio input [5];Maximum Input Level: 2 Vrms;Input Impedance: 44k OhmsTO RX(1) 8-pin RJ45 connector, female, shielded;Link port for connection to HD-RX-201-C-E receiver [1]24VDC 1.25A(1) 2.1 x 5.5 mm DC power connector;24 Volt DC power input;PW-2412WU power pack included [13]SERVICE(1) USB Type A connector, female;USB host port for connection of a Crestron TT-100 series device (Crestron Connect It) [2]Connectors at Receiver (HD-RX-201-C-E)HDMI, INPUT 1(1) HDMI Type A connector, female;HDMI digital video/audio input (DVI & Dual-Mode DisplayPort compatible [3])FROM TX, INPUT 2(1) 8-pin RJ45 connector, female, shielded;Link port for connection to HD-TX-301-C-E transmitter [1];Maximum cable length: 230 ft (70 m)HDMI OUTPUT(1) HDMI Type A connector, female;HDMI digital video/audio output (DVI compatible [6])AUDIO L/R(1) 5-pin 3.5 mm detachable terminal block;Balanced/unbalanced stereo line-level audio output [7];Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced;Output Impedance: 200 Ohms balanced, 100 Ohms unbalancedIR(1) 2-pin 3.5 mm detachable terminal block;IR output control port;Supports IR up to 60 kHz;IRP2 emitter sold separately;Note: Provides power on/off control of the display device without a control system, or fully programmable control of any device with a control systemCOM(1) 5-pin 3.5 mm detachable terminal block;Bidirectional RS-232 port;Supports RS-232 up to 115.2k baud with hardware and software handshaking;Note: Provides power on/off control of the display device without a control system, or fully programmable control of any device with a control systemLAN(1) 8-pin RJ45 connector, female;10Base-T/100Base-TX Ethernet port24VDC 1.25A(1) 2.1 x 5.5 mm DC power connector;24 Volt DC power input;PW-2412WU power pack included [13]SERVICE(1) USB Type A connector, female;For factory use onlyControls & Indicators at Transmitter (HD-TX-301-C-E)TO RX(2) LEDs (on RJ45 connector), green LED indicates DM Lite link status, amber LED indicates a valid video signalPWR(1) Bi-color green/amber LED, indicates operating power is supplied from the power pack via the 24VDC input or from the RX via the DM Lite link, turns amber while booting and green when operatingAUTO(1) Pushbutton to enable/disable auto-switching mode, and (1) green LED to indicate auto-switching mode is enabledINPUT 1 – 3(3) Pushbuttons for manual input selection, and (3) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding inputSETUP(1) Red LED and (1) recessed pushbutton for Ethernet setupControls & Indicators at Receiver (HD-RX-201-C-E)FROM TX, INPUT 2(2) LEDs (on RJ45 connector), green LED indicates DM Lite link status, amber LED indicates a valid video signalLAN(2) LEDs (on RJ45 connector), green LED indicates Ethernet link status, amber LED indicates Ethernet activityPWR(1) Bi-color green/amber LED, indicates operating power is supplied from the power pack via the 24VDC input or from the TX via the DM Lite link, turns amber while booting and green when operatingAUTO(1) Pushbutton to enable/disable auto-switching mode, and (1) green LED to indicate auto-switching mode is enabledINPUT 1 – 2(2) Pushbuttons for manual input selection, and (2) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding inputSETUP(1) Red LED and (1) recessed pushbutton for Ethernet setupPowerPower Pack(included)Input: 0.8 Amps (maximum) @ 100-240 Volts AC, 50/60 Hz;Output: 1.25 Amps @ 24 Volts DC;Model: PW-2412WUNOTE: The transmitter and receiver are powered together using a single power pack. The power pack may connect to either the transmitter or receiver, not both.Power Consumption13 Watts typicalEnvironmentalTemperature32° to 104° F (0° to 40° C)Humidity20% to 90% RH (non-condensing)Heat Dissipation44.3 BTU/hrConstructionApplicable to both the transmitter and receiver:ChassisMetal, black finish, with (2) integral mounting flanges, vented sidesMountingFreestanding, surface mount, or attach to a single rack railDimensionsTransmitter(HD-TX-301-C-E)Height: 1.11 in (28 mm);Width: 7.70 in (196 mm);Depth: 5.12 in (130 mm)Receiver(HD-RX-201-C-E)Height: 1.11 in (28 mm);Width: 7.70 in (196 mm);Depth: 4.94 in (126 mm)WeightTransmitter(HD-TX-301-C-E)20.0 oz (567 g)Receiver(HD-RX-201-C-E)20.82 oz (590 g)ComplianceUL Listed for US & Canada, CE, IC, FCC Part 15 Class B digital deviceClick here to search product certificates.For the DM Lite link cable between the TX and RX, use Crestron DM-CBL-8G DigitalMedia 8G™ cable or third-party CAT5e (or better). The maximum cable length is 230 ft (70 m). Shielded cable and connectors are required when bundling multiple cables in a wire run, and are recommended for all applications to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. All wire and cables are sold separately. DM Lite devices are not compatible with DigitalMedia 8G+® (DM 8G+®), HDBaseT®, PoE, PoDM, or any other CATx based interface or network.Crestron Connect It Cable Caddy (TT-100 series) sold separately. Refer to the TT-100 spec sheet for more information.Each HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.The VGA input can accept RGB and component video signals through an appropriate adapter (not included).The analog audio input is only active when the VGA input is selected. It can be used with an audio-only source with no video source connected. The analog audio input cannot be paired with an HDMI video input.The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.The analog stereo audio output is only active when the input is receiving a 2-channel stereo signal via either the analog input or HDMI.EDID (Extended Display Identification Data) is data embedded in an HDMI, DVI, or VGA signal that enables the display device to tell the scaler what resolutions and formats it can support, allowing the scaler to configure itself automatically to feed an optimal output signal to the display.Item(s) sold separately.Supports any input resolution and scan rate that has a pixel clock of 165 MHz or lower.The transmitter and receiver are powered together by a single wall mount power pack (included), which may be connected to either the transmitter or receiver, not both.With or without reduced blanking.With reduced blanking only.This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at https://www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.The specific patents that cover this and other Crestron products are listed online at https://www.crestron.com/legal/patents.Certain Crestron products contain open source software. For specific information, visit https://www.crestron.com/opensource.Crestron, the Crestron logo, .AV Framework, AirMedia, Crestron Connect It, Crestron Fusion, DigitalMedia 8G, DigitalMedia 8G+, DM 8G+, QuickSwitch HD, and Saros are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Blu-ray is either a trademark or registered trademark of the Blu-ray Disc Association in the United States and/or other countries. Dolby Digital is either a trademark or registered trademark of Dolby Laboratories in the United States and/or other countries. DTS is either a trademark or registered trademark of DTS, Inc. in the United States and/or other countries. HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2018 Crestron Electronics, Inc.