Check the listing for details. Doug Fleenor Designs PRE10-A 10-Button Wall Mounted DMX Controller. Condition: New. Listed at 686.87 USD. Save up to 10 of your favorite lighting presets in the DMX512 based PRE10-A architectural system from Doug Fleenor Designs. Working in conjunction with a lighting console, presets are captured via programmed output and stored for quick use. With automatic switching, lighting consoles and the PRE10-A can operate independently from one another, holding a look if one unit goes offline or simplifying control when needed. Save lecture hall looks or general stage looks for visiting artists, each preset can be assigned a unique fadetime and simply recalled at the touch of a button.FeaturesRecords up to 10 PresetsAssign crossfade time from 0 - 999 seconds in lengthSolid aluminum, one-gang faceplateWorks in conjunction with lighting consoleConnect via power (2 wires) and DMX 512 (3 wires)SpecificationsConnector: Phoenix Contact MSTB series 5 position two part terminal blockModel: MSTB 2,5/5-ST-5,08 Order Number: 17 57 04 8Connector pin out:1: DMX512 common2: DMX512 data -3: DMX512 data +4: Supply common (tied to pin1)5: Supply “hot”Input/Output circuit: ESD protected EIA-485 transceiver (LT1785)Indicators: Ten green preset indicator LEDsOne red Lockout / Record LEDUser controls: Ten preset push buttonsOne recessed record push buttonOne recessed fade time push buttonOption jumpers: Master / Slave mode selectionPrevious preset / Hold last look mode selectionPower input: 9 to 15 volts AC or DC / 200mA per station(A 10 volt class 2 “doorbell” transformer is recommended for fixed installations)Color: Black anodized with silver engraved nomenclatureSize: Faceplate: 4.5"h X 2.75"w X 0.2"dFaceplate: rear inset: 4.05"h X 2.4"w X 0.1"dElectrical box minimum inside dimensions: 3.5"h X 2.1"w X 1.25"d