Check the listing for details. Dry Ice Blasting Machine Dry Ice Blaster Car Engine Cleaner Intake Valve Cleaner. Condition: New. Listed at 1999.00 USD. AUTOOL HTS705 Dry ice cleaning uses compressed air as power to spray dry ice particles to the surface of the cleaned object at supersonic speed. It uses the ultra-low temperature performance of dry ice to achieve the purpose of decontamination.The cleaned dry ice will evaporate in the environment, safe and without residue, and will not damage the vehicle. WIDELY USED HTS705 dry ice machine are suitable for removing stuck and flaking formulations, silicone and rubber residues, oils, greases, turpentine, asphalt, dirt, inks, resins, adhesives, waxes and paints, chewing gum, and graffiti. It has been widely used in rubber, casting, automobile, marine, electric power, chemical, printing, plastic, food, pharmaceutical and aviation fields. PROTECTION AND SAFETY Dry ice cleaning will not cause wear or tear on the cleaning parts . Carbon deposits will become powder instantly under the impact explosion of high-pressure air and -78.5℃ dry ice particles, and finally, the dry ice sublimation decomposes and impurities are discharged from the engine through compressed air. The whole process is non-toxic, which will not cause secondary pollution. HIGH-EFFIENCY CLEANING Dry ice cleaners can remove adhering dirt thoroughly, while also providing good protection for the equipment to avoid interfering with the operation and use of the equipment during cleaning. CLEANING TIME & ICE CONSUMPTION Factors: Cleaning degree Carbon deposits AMT Technician's skill Avoid personal injury caused by hazardous substances. OPERATION STEPS Step 1: Connect the air source andpower supply: Step 2: Connect the ice blasting gun; Step 3: Connect the ground wire; Step 4: Add in dry ice; Step 5: Turn on the power and adjustthe amount of dry ice; Step 6: Start cleaning; USER-FRIENDLY DESIGN The universal wheel at the bottom of the dry ice blasting equipment supports 360° rotation for cleaning; multi-function control panel; large knob control, precise positioning of dry ice spray volume; body pendant for easy placement; stainless steel funnel, waterproof, rust and corrosion resistant, ergonomic Designed to view the amount of dry ice in real-time. Intelligent microcomputer can precisely control the pressure, which can freely adjust the pressure and ice rate. Quickly remove all kinds of intractable dirt. MULTI- FUNCTIONS Using dry ice cleaning instead of toxic chemicals cleaning, to avoid the harm caused by hazardous substances on the personnel; dry ice machine can quickly clean a variety of dirt, effective cleaning equipment, improve productivity; Adopting the intelligent microcomputer design,the pressure and the speed of dry ice spraying can be accurately adjusted through the intelligent control panel according to needs to achieve the best cleaning effect. After the Cleaning Work: 1. Turn the dry ice volume adjusting controller to “0” and start the spray gun to spray for 30-50s until no water is sprayed. 2. The dry ice residue can be removed by extending the product’s spraying time, and manual cleaning is required if necessary. 3. Turn off the power switch, disconnect the air source, and store the spray gun and accessories. SPECIFICATIONS Power supply: AC110V/220V±10% 50Hz Dry ice capacity: 5KG Compressed air flow: >1~3.0m³/min Dry ice particle state: 3mm Air supply pressure: 0.3~1.0Mpa Dry ice blasting amount (adjustable): 0~3.2KG/min Dimensions: 460mm x 660mm x 835mm Trachea length: 8m Net weight: 45KG，Gross weight: 50KG PRODUCT DETAILS AUTOOL HTS705 Automotive Dry Ice Cleaning Machine*1 pc Ice shovel: *1 pc Gloves: *1pc，Earplugs: *1 pc Safety goggles: *1 pc Intake hose: *1 pc Ice outlet hose: *1 pc (with signal line) 1* A set of blasting gun accessories (flat head barrel, 35cmΦ5 elbow, 35cmΦ5 elbow, 35cmΦ4 straight tube, 35cmΦ4 straight tube, 50cmΦ5 hose) 1*Hand-held spray gun Certificate: *1 pc User Manual: *1 pc