Check the listing for details. EMX ULTRA-PLG PLUG-IN STYLE VEHICLE LOOP DETECTOR ULT-PLG EXIT SAFETY DETECTION. Condition: New. Listed at 89.95 USD. EMX ULTRA-PLG PLUG-IN STYLE VEHICLE LOOP DETECTOR ULT-PLG EXIT SAFETY DETECTION EMX ULTRA-PLG PLUG-IN STYLE VEHICLE LOOP DETECTOR ULT-PLG EXIT SAFETY DETECTIONULTRA-PLG PRODUCT OVERVIEWThe ULTRA-PLG vehicle loop detector combines small size with full-featured functionality in a plug-in module.This detector features DETECT-ON-STOP™ or (DOS) technology, which allows detection only when a vehicle has come to a complete stop on the loop. This exclusive feature is unique to EMX and is a major advantage if you want to ignore cross traffic in tight spaces.The ULT-PLG provides a solid-state output indicating vehicle presence. The second output can be used for presence, loop fault or pulse on entry/pulse on exit. Our latest vehicle detector provides options for automatic sensitivity boost (ASB), delay, fail-safe/fail-secure and infinite and normal (5 min.) presence.This detector is easy to install and operate. Sensitivity selection is simplified by the ULTRAMETER™. Ten sensitivity settings allow for finer adjustment of the detection level. The four frequency selections help to prevent crosstalk in multi-loop applications.FEATURES OF OUR PLUG-IN STYLE VEHICLE LOOP DETECTORWhen you choose our ULTRA-PLG for your vehicle, you can count on the following advantages:ULTRAMETER™ displays optimum sensitivity setting/crosstalk interferenceFrequency count/reset switch10 sensitivity settings4 operating frequenciesSolid-state outputSecond output, pulse entry/exit, normal/infinite presenceCE compliantDETECT-ON-STOP™ allows detection only when a vehicle has come to a complete stop on the loopSensitivity10 levels, 0-9UltraMETER™ displayIndicates optimum sensitivity level, 0-9 diagnostic aidLoop frequency4 settings (low, med-low, med-hi, high)Loop inductance20…2000µH (Q factor > 5)Grounded loopIsolation transformer allows operation with poor quality loopsAutomatic tuningDetector tunes to loop on power-up and following frequency count functionEnvironmental trackingAutomatic compensationSurge protectionLoop circuitry protected by surge suppressorsDetect outputSolid-state (open collector)Output BSolid-state (open collector)Output B invertedSolid-state (open collector)Power / loop fault indicatorGreen LEDDetect / frequency count indicatorRed LEDDetect-on-StopRequires vehicle to stop for a minimum of 1 second (1-2s typical)ASB (Automatic Sensitivity Boost)Increases sensitivity after initial detection to prevent dropout due to high-bed vehiclesPower12VDC…24VDCOperating current15 mAOperating temperature-40°C…82°C (-40°F…180°F) 0…95% relative humidityDimensions (L x W x H)3.0”(76mm) x 0.9”(22mm) x 2.75”(70mm)Weight0.15 lbs. (68 g)Connector10-pin femalePayments & Returns Policy