Check the listing for details. Estes Flying Model Rocket Kit Tazz EST 7282. Condition: New. Listed at 25.19 USD. Estes Flying Model Rocket Kit Tazz EST 7282A re-imagining of an Estes classic! Based on the Estes Gyroc of the 60s, the TAZZ is an awesome addition to any rocketeers collection. Launch it up to 700 feet on a C6-3 engine and watch as it spins back down to earth!Based on the vintage Estes Gyroc of the late 60s, this new and improved version, the TAZZ, features the same whirlybird spin recovery system of the original. When launched with an Estes C6-3 engine, the TAZZ can reach heights of 700 feet. At apogee, the engine pod is pushed out, activating the ailerons (small-hinged fins) which then start the TAZZ in its spiral descent. A bright orange streamer helps track and recover the engine pod, while onlookers will watch in awe at the TAZZ’s unique and exciting spin back down to earth. Streamlined and nearly twice as long as the original, the new TAZZ is big and exciting to watch. It is sure to be a big hit at any local launch site.Assembly Required Skill Level 3 AdvancedRecommended Engines A8-3, B6-2, B6-4, C6-3Projected Max Altitude 700 ft. (213 m)Recovery System 18 in. (45.7 cm) Streamer, SpinLength 16.6 in. (42.2 cm)Wingspan 7 in. (17.78 cm)Diameter .98 in. (25 mm)Estimated Weight 1.3 oz. (36.9 g)Fin Materials Laser cut woodDecal Type WaterslideLaunch System Porta-Pad II and Electron Beam Launch ControllerLaunch Rod Size 1/8"Age Recommendation Estes model rocketry is recommended for boys and girls ages 10+ with adult supervision for those under 12, and rocketeers of all ages. Model Rocket Kits are rated by Skill Level1 Beginner2 Intermediate3 Advanced4 Expert5 MasterIf you are just starting in the hobby start at the beginner level and move up from there at your own pace.What is needed to build and flyAll model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit. Additional supplies will be necessary to build and finish your model rocket kit and may include:Scissors, Hobby KnifeRulerWood Glue, Model Cement or CA(Super Glue)SandpaperMasking TapeFinishing Supplies like:Wood FillerSealer/PrimerPaintLaunching Equipment and Supplies like:Recovery waddingLaunch PadLaunch ControllerPower supplyModel Rocket Motors and IgnitersA safe place to fly using guidelines from the National Association of Rocketry Safety Code