Check the listing for details. Flir TAU/TAU2 Thermal Camera Controller Color Palate/Zoom/Freeze/FFC/AGC NO PC. Condition: New. Listed at 100.00 USD. This sale/auction is for a programmed Embedded Control Board add-on for your Flir/Indigo Tau or Tau2 (will work with Photon 160, Photon 320 or Photon 640 )Thermal Imaging Cameras.This Board works on the Flir Tau / Tau 2 (with 2,4X zoom ) or other Flir Thermal Camera with Photon Replicator Board. This sale is for the Control Board Only (or with switches) All else shown here is for visual purposes only. We have also designed EXTERNAL shutter for the photon series cameras if your shutter is broken. You will need the 50 pin HIROSE connector, or access to RS232, ground and Power. The Flir Camera control GUI is available online, but with our board, No PC required to control the following functions: Color Palate:WHITEHOTBLACKHOTFUSIONRAINBOWGLOBOWIRONBOW1IRONBOW2SEPIACOLOR1COLOUR2ICE AND FIRERAINROI-Zoom:ZOOM2XZOOM4XREALTIMEFREEZEFRAMENon Uniformity Correction - Manual ShutterFFC/NUCCamera Reset:5 AGC SettingsThe simple board level design has flying leads and you will need to do all soldering/connections to Thermal Camera, Power, Video and pushbuttons. Wired version requires only connections to camera, power and video. Contact us through eBay for customizations or any questions. THIS controller does not affect the framerate of the Thermal Camera, it will work on all variations, 9Hz, 30 or 60Hz TIC's Please note: incorrect attachment during hookup can damage this or other devices. We are not there to assure correct wiring. Please specify if this is for Tau/Tau2 or Photon Thermal Cameras when ordering for proper firmware