Check the listing for details. Network Video Technologies NV-16PS13-PVD. Condition: Used. Listed at 199.00 USD. The NV-16PS13-PVD from NVT is a Power Supply Passive Receiver Hub that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. The NV-16PS13-PVD from NVT is Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room. and has independently selectable 24VAC-OFF-28VAC outputs that supports at-distance camera loads up to 1 Amp per channel. The NV-16PS13-PVD also uses cable runs under 750ft (225m).It also includes Per-channel diagnostic LEDs that displays load/no-load, mis wires, or fault conditions at a glance. Automatic-reset fault protection, transient protection, and ground loop free individually floating outputs.FeaturesProvides Class 2 SELV camera power while receiving video transmission and delivering P/T/Z telemetry all over a single 4-pair Cat5e cableAutomatic-reset fault protection; transient protectionDiagnostic LEDs show load/no load, mis wires, and overload conditionsPower cameras via UTP over significant distances1U high; 12" deep; wall, desk, or rack-mountableSpecsManufacturer Network Video TechnolgyCondition NewModel NV-16PS13-PVDFrequency response DC to 5 MHzCoax, male BNC - UTP, Screwless terminal block 75 ohms - 100 ohmsAmbient temperature -4 to +122 °F (-20 to +50 °C)Humidity (non-condensing 0 to 95%Dimensions 19in wide, 1.73in high, 12in deep43cm wide, 4,5cm high, 20cm deepBlue Power-OnOff No load connectedGreen Load connected and workingAmber Mis-wiring detectedRed Overload fault conditionPower inlet IEC with molded power cord (included)Voltage 115 / 230VCurrent 3.0 / 1.5 AmpsWattage 325 Watts