Check the listing for details. OK Industries PTX-KIT1 Battery-Powered Tool Kit. Condition: Used. Listed at 460.00 USD. This Item is almost new open box and never been used. Everything is 100% excellent working condition.OK Industries PTX-KIT1 Battery-Powered Tool Kit includes a PTX battery-powered wire wrap/unwrap tool, PTX-BC1 charger and two PTX-B 3.6V NiMH batteries. PTX wire wrapping tool features an ergonomic design with lightweight construction, reversible motor, dual-finger short-throw trigger and LED indicator for low voltage. Rugged housing encases a high-torque planetary gear drive that can wrap/unwrap 18 to 32 AWG wire. Compatible with the full range of industry-standard bits and sleeves.The PTX-Kit1 dimensions are 15" x 10" x 3" with a total weight of 3 pounds. DETAILS : The PTX wire wrapping tool features an ergonomic design with lightweight, well-balanced construction, reversible motor, dual-finger short-throw trigger, an LED indicator for low voltage and a long handle to reduce muscle strain. The recessed wrap/unwrap switch is easy to access at the rear face of the housing and is protected from impact if the tool is dropped. Its rugged housing encases a high-torque planetary gear drive that can wrap or unwrap 18 to 32 AWG wire, and is compatible with the full range of industry-standard bits and sleeves.This battery-powered version requires an initial charge of the battery for at least eight hours. The LED will illuminate to indicate that the battery is present in the charger. LED will remain lit as long as the battery is present, even after full charging but there is no danger in leaving the battery in the charger for longer than eight hours. When the battery begins to lose its charge (at approximately 3.3-V), the red LED indicator located on the top surface of the tool will begin to glow. At this point, depending on the application, the battery should still contain enough charge for several hundred additional wrapping or unwrapping operations. After approximately 500-700 uses, the battery should be disposed of and replaced. The PTX-B is an environmentally friendly NiMH battery which can be disposed of along with normal refuse. SPECIFICATIONS :115V battery tool kit (tool, charger, (2) batteries). The patented PTX Series of Wire Wrapping Toolsbring a new level of wire wrapping proficiency to installers, telecom technicians and other users.This wire wrapping tool has a maximum usage rating of 2,500 cycles/day, will wire wrap 18 to 32AWG wire.The PTX also features a dual-finger short-throw trigger, a long handle to mitigate pressure on thepalm to prevent repetitive stresses and a comfort design based on the recommendations of ourcertified ergonomist. The housing is rugged yet light in weight and includes additional featuresincluding a low battery indicator, wrap unwrap switch, a high-powered motor for the heaviestgauges of wire and a permanently attached collet nut. Weight 3.5 lb., Powered by long-life NiMHbattery 3.6V, 3700 RPM. Includes Battery Powered Tool, Batteries, 115V ChargerRPM 3700Voltage 3.6V (NiMH Battery)Weight 3.148 lbs. No Warranty. No Returns.