Check the listing for details. PNP FX-551P Panasonic Digital Fiber Optic Sensor 12V～24V DC w/ Trigger Bracket. Condition: Used. Listed at 24.95 USD. ItemPerformance characteristicsCE Marking Directive ComplianceEMC Directive, RoHS DirectiveSupply Voltage12 to 24 V DC +10-15 % Ripple P-P 10 % or lessPower ConsumptionNormal operation : 960 mW or less (current consumption 40 mA or less at 24 V supply voltage)ECO mode : 680 mW or less (current consumption 28 mA or less at 24 V supply voltage)OutputPNP open-collector transistor・Maximum source current : 100 mA・Applied voltage : 30 V DC or less (between output and +V)・Residual voltage : 2 V or less (at maximum source current)Output: Output OperationSwitchable either Light-ON or Dark-ON by L/D modeOutput: Short-Circuit ProtectionIncorporatedResponse TimeFAST : 60μs or less, STD : 250μs or less, LONG : 2ms or less, U-LG : 4ms or less, HYPR : 24ms or less, selectableSensitivity Setting2-point teaching / Limit teaching / Full-auto teaching / Manual adjustmentIncident Light Sensitivity SettingIncorporated, 4 stepsIncident Light Intensity Display RangeFAST / STD : 0 to 4,000, LONG : 0 to 8,000, U-LG / HYPR : 0 to 9,999Timer FunctionIncorporated with variable OFF-delay / ON-delay / One-shot / switchable either effective or ineffectiveTimer Function: Timer PeriodTimer range "ms" : 1 to 9,999 ms approx., 1 ms approx., Timer range "sec." : 1 to 32 s approx., 1 s approx.,Timer range "1/10 ms" : 0.1 to 999.9 ms approx., 0.1 ms approx.(Note): When set to LONG, U-LG, HYPR, IP-F or IP-R, the time range cannot be set to 1/10 ms.Different Frequency Interference Prevention FunctionIncorporated (up to 4 units). Note that the response time varies depending on the setting.F-1 : 0.8 ms or less, F-2 : 0.9 ms or less, F-3 : 1.0 ms or less, F-4 : 1.7 ms or less(Note): This function increases the hysteresis. Check the sensing condition when using the function.ProtectionIP40(IEC)Ambient Temperature-10 to +55 ℃ +14 to +131 ℉ (If 4 to 7 units are mounted in cascade : -10 to +50 ℃ +14 to +122 ℉ or if 8 to 16 unitsare mounted in cascade : -10 to +45 ℃ +14 to +113 ℉)(No dew condensation or icing allowed), Storage : -20 to +70 ℃ -4 to +158 ℉Emitting Element (Modulated)Red LED (Peak emission wavelength : 660 nm 0.026 mil)MaterialEnclosure, Case cover : Polycarbonate, Switch : PolyacetalCable0.2 mm2 3-core cabtyre cable, 2 m 6.562 ft longCable ExtensionExtension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (however, supply voltage 12 V DC or more)Weight (Typ.)Net weight : 55 g approx., Gross weight : 90 g approx.RemarkWhere measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.Directive ComplianceEMC Directive, RoHS DirectiveVibration Resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 G max.) in X, Y and Z directions for two hours eachShock Resistance98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each