Check the listing for details. Proximity RFID Card Reader 13.56MHz Wiegand 26/34 bits for Access Control System. Condition: New. Listed at 25.90 USD. Document Introduction The RFID card reader can't work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller. It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer. Details Features The maximum reading distance is 6cm. Waterproof, conforms to IP66. It is useful for safety door system, easy to connect and use. Ultra-low power consumption, the standby current is less than 50mA. Support wiegand 26bits or wiegand 34bits output format. Fast response speed, the door opening time is less than 0.3s. Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on. Specification Working Voltage: 12VDC Static Current: ≤50mA Card Type: IC Frequency: 13.56MHz Working Temperature: -40℃~60℃ Working Humidity: 10%-90%RH Output Format: Wiegand 26bits or Wiegand 34bits (Selectable) Waterproof Rating: IP66 Shell Material: PC + ABS Panel Material: PC Shell Size: 90x45x19mm / 3-35/64" x 1-49/64" x 3/4" Communication Distance: Less than 100M / 328ft Lead Cable Length: 25cm / 9-27/32" Status Indication: Bi-color LED + Buzzer LED Status Indication: Red means standby, Green means activated Wiring Demo Video Note Please notice that our wiegand 26 reader can't be compatible with some encrypted cards, such as HID, Indala, Cobra, APCiK, Paradox, Radio, Honeywell, etc Can't work alone, need work with access control panel Package 1 x Card Reader 1 x User Manual 2 x Plastic Anchors 2 x #7 x 1" Self-Tapping Screw, used for fixing