Check the listing for details. Raise3d N1 / N2 / N2+ Printer Touchscreen Repair Kit. Condition: New. Listed at 30.00 USD. Raise3d N1 / N2 / N2+ Printer Touchscreen Repair Kit This ebay listing is for an adapter board and flat flex cable as pictured. This adapter board allows you to use aftermarket replacement touchscreens for your Raise3d N1, N2, or N2+ 3d printer. If your Raise3d touchscreen is partially responding to touches or not responding to touches at all, then this adapter board should be your solution to a working touchscreen again. Before ordering this item, make sure your printer is compatible with it.You need to verify that your touchscreen display shield is a "DISPLAY-SHIELD-V04".Some printers have a "KD-D070NB01" and this adapter board will not work with it. See the installation guide: [ https://imgur.com/a/II9NafF ] You will need to purchase the replacement touchscreen yourself. The adaptor board is known to work with the following screens: Displaytech DT070DTFT-IPS-PTS [ https://www.mouser.com/ProductDetail/758-DT070DTFTIPSPTS ] [ https://www.digikey.com/en/products/detail/displaytech/DT070DTFT-IPS-PTS/11561139 ]Displaytech DT070DTFT-IPS-HB-PTS [ https://www.mouser.com/ProductDetail/758-DT070DTFTIHBP ] [ https://www.digikey.com/en/products/detail/displaytech/DT070DTFT-IPS-HB-PTS/11561142 ]