Check the listing for details. 89145 Permatex RTV Silicone Gasket maker Supra Grey Gasket 35134. Condition: New. Listed at 15.50 USD. 89145 Permatex ® High Temperature Silicone Sealant Pan Gasket Supra Grey Gasket 35134DELIVERY: 1 Pcs. Overview OEM specified. Permatex® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, noncorrosive. Outstanding oil resistance and joint movement tolerance. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temperature range -65ºF to 500ºF (-54°C to 260°C) intermittent; resists auto and shop fluids and vibration. Application Automobile Suggested Applications: Valve covers, oil pans, automatic transmission pans, intake manifold end seals, timing covers, water pumps, and thermostat housings Heavy Duty Suggested Applications: Cover housing gasket, differential, assembly to rear axle housing, power dividers, axle shaft flanges Instruction DIRECTIONS: For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake & Parts Cleaner. Gaskets are best formed using a 1/16" to 1/4" (2 to 6 mm) bead. Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then retighten 1/4 to 1/2 turn. Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions. Replace cap after use. Clean hands with dry cloth or Permatex® Fast Orange® Hand Cleaner. Clean tools with non-flammable cleaning fluid. NOTE: Not recommended for use on head gaskets or parts in contact with gasoline.