Check the listing for details. Sartorius LMA200PM Microwave Moisture/Solid [Reconditioned]. Condition: Seller refurbished. Listed at 7500.00 USD. Sartorius Microwave LMA200PM [reconditioned]Description:Sartorius Microwave Moisture/Solids analyzerDries in approximately 40 to 120 seconds.Easy-to-operateImprove process controlEasy to clean and disinfectIncrease profitsRugged and durablePrecise measurement of liquids, solids, slurries, fat (when used with CEM Fat Extractor), High volatiles Dilution, total suspended solids (TSS) and bias Syringe weighingLow-noise thermal printerPrinter (external) OptionalTouch screen keysStores up to 320 drying programsThere are three modes to choose from for analysisThere are two modes to choose from for operation of the microwaveSpecifications:Measurement method: Sample heated by microwave radiation; moisture content calculated from loss on dryingMicrowave generator: 1000 WPower output: 2% to 100%, configurable in 1%-stepsMeasurement range: 8% to 100%Accuracy: From 1 g initial sample weight +/– 0.05%Response time: Approximately 40 to 120 seconds (depends on sample and moisture content)Display of results: % moisture content with calculation options; ppm moisture content,% volatile components, %, ppm solids, g solids, mg solids, % ratioWeighing capacity: 70 gResolution|reading accuracy of the weighing system: 0.1mgReading accuracy of the measurement results: 0.001%Display module: 1/4 VGAControl elements: Touchscreen, 5 function keysProgram memory: 320 drying programs with alphanumeric designationData storage: The 500 most recent results, with statistical evaluation, stored in battery-backed memoryBuilt-in printer: Thermal printer, 40 characters per lineData interfaces: 1 serial RS-232 interface, 1 Ethernet portPollution degree 2: Normally only nonconductive pollution or temporary conductivity caused by condensation.Limitation of emissions: In accordance with EN 61326-1 (IEC 61326-1):Group 1, Class B, suitable for use in domestic establishments and establishmentsdirectly connected to a low-voltage power-supply network that supplies buildings used for domestic purposes.Immunity to interference: In accordance with EN 61326-1, (IEC-1 ):Immunity test requirements for equipment intended for use in industrial locations (Table 2)Electrical safety: In accordance with EN 61010-1 (IEC 61010-1)Electrical Requirement:Dimensions: (H + W + D) 304 + 510 + 535 mm (12 + 20 + 21 in.)Weight: Approximately 22 kg (48.4 lbs)Power source: 230 V, 50 Hz, 1200 VA (LMA200PM-000EU)115 V, 60 Hz, 1200 VA (LMA200PM-000US)Fuse: 2 + 10 A/T (5 + 20 mm)