Check the listing for details. SGM58031 4-channel 16 Bit Analog-to-digital Data Acquisition Conversion Module. Condition: New. Listed at 5.29 USD. Categories SGM58031 4-channel 16 Bit Analog-to-digital Data Acquisition Conversion Module DescriptionProduct Features:1. SGM58031 is a 4-channel adapter board, ideal for use in high resolution analog to digital conversion microprocessors 2. It operates from 2V to 5V, so it is suitable for all common 3.3V and 5V processors 3. This 4-channel adapter board controls 2 identical I2C buses and provides up to 16 single-ended or 8 differential channels 4. The programmable gain amplifier provides up to ×16 gain for small signals, and SGM58031 has high resolution 5. The chip is small, so it keeps AVDD and AGND quiet in a breakout board with ferrite, and the interface is done via l2C, and the address can be changed to one of four options so that you can connect up to four SGM58031s on a 2-wire l2C bus for 16 single-ended inputs Product parameters:Resolution:16 bitsWide power supply range: 2.0V to 5.5VLow current consumption.1. Continuous mode: only 150uA2. Single mode: automatic shutdownProgrammable data rate: 8SPS to 860SPSInternal low drift reference voltage sourceInternal oscillatorInternal PGAI2C interface: pin selectable addressFour single-ended or two differential inputsProgrammable ComparatorThis board/chip uses l2C 7-bit address between 0X48-OX4B, selectable via jumper Size: about 28mm*12mm Product List:1* Module1* Row of pins SGM58031 4-channel 16 Bit Analog-to-digital Data Acquisition Conversion Module DescriptionProduct Features:1. SGM58031 is a 4-channel adapter board, ideal for use in high resolution analog to digital conversion microprocessors 2. It operates from 2V to 5V, so it is suitable for all common 3.3V and 5V processors 3. This 4-channel adapter board controls 2 identical I2C buses and provides up to 16 single-ended or 8 differential channels 4. The programmable gain amplifier provides up to ×16 gain for small signals, and SGM58031 has high resolution 5. The chip is small, so it keeps AVDD and AGND quiet in a breakout board with ferrite, and the interface is done via l2C, and the address can be changed to one of four options so that you can connect up to four SGM58031s on a 2-wire l2C bus for 16 single-ended inputs Product parameters:Resolution:16 bitsWide power supply range: 2.0V to 5.5VLow current consumption.1. Continuous mode: only 150uA2. Single mode: automatic shutdownProgrammable data rate: 8SPS to 860SPSInternal low drift reference voltage sourceInternal oscillatorInternal PGAI2C interface: pin selectable addressFour single-ended or two differential inputsProgrammable ComparatorThis board/chip uses l2C 7-bit address between 0X48-OX4B, selectable via jumper Size: about 28mm*12mm Product List:1* Module1* Row of pins