Check the listing for details. TE-CO PWS-6900 SINGLE STATION MILLING MACHINE VISE With HANDLE. Condition: Used. Listed at 395.00 USD. Vises are used and come from working environments. Often they are full of chips and covered in oil, I take them all the way apart, clean them up, inspect them for accuracy, and record the results and any damage found. I am able to regrind vises flat if need be or if you wish to match with one you currently have. Please review all pictures for specific condition. Vise in the pictures is the one you will receive. Packages ship next day in foam filled boxes. Bed height: 2.876” Flatness: .0001” Perpendicularly: .0001” Opening between jaws: 10.5” •opening with jaw plates installed: 9” Bed is in very good shape, no drill marks. Vise is very flat and perpendicular. Designed the same as a Kurt D688, jaws are interchangeable. I do offer slim jaws that will gain 1/2” of clamping area when used in pairs. Vise opens and closes smooth across the entire travel. I offer a 20% discount on new jaws when purchased with a vise. The following information was pulled from TE-CO’s website: Clamping Pressure:8200 lb Jaw Opening:9.000 in228.60 mm Jaw Width:6.000 in150.00 mm Total Length:19.376 in Total Width:8.770 in222.80 mm Total Height:4.625 in MaterialDuctile: Iron Weight:81.00 lb Features: •Up to 8,200 lbs. of clamping force •Bed height matched to size 2.875" (73.025mm) ± 0.0005" •Repeatability within 0.001" •Hardened vise bed and jaw plates. •Outside rail edges of the body are machined. •Sealed bearing system reduces clamping pressure and increases bearing life. •Stationary jaw has machined keyway for alignment of the vise and includes alignment rail for quick setups. •Footprint and distance from keyway to stationary jaw same as major competitor. LOC 6900-3