Check the listing for details. Winwing Compatible Joystick Extension. Condition: New. Listed at 51.15 USD. The Joystick extension fits the Winwing Joystick ranges and is ideal when using the a centre mount. The main tube is 30mm in diameter and comes in a choice of two different styles: Kinked (K) and Gooseneck (G), has offsets of 25mm, 50mm or 75mm depending on height choice that bring the grip closer to the pilot and in lengths between 100mm and 250mm that add height, ideal when centre mounting. Unlike most others available, this extension is fully hardwired allowing easy no-fuss swap out between joystick handles and extension/no extension modes. The plug and the socket on the extension can be rotated to suit the orientation of the sockets and plugs on the Winwing original bases and grips. This is necessary as the rotation of the socket in some Winwing Bases differ from others, even the same models. DO NOT OVER ROTATE the plug and socket in the extension when aligning, just rotate enough to line them up properly. Spinning them round for laughs will break the wiring eventually causing failure. There is a grub Screw on the top knurled screw and 2 stainless steel catch plates on the bottom screw section for the grub screw on the base. New for F-16 Enthusiasts! We have added two new short extensions with a rake of 12° to tilt the grip forwards, the first adds only 40mm of height to achieve this and the second adds 80mm height but adds a 25mm offset to centralise the stick's weight over the base. (see pics) CompatbilityWinwing Joystick Bases and Winwing Joystick GripsNo other bases or grips are considered compatible at this time. Winwing Base Orion 2 Joystick Base Winwing Grips F-16EX Viper Metal Joystick GripF/A-18 Hornet Metal Joystick GripOrion2 Airbus A3XX Joystick Grip Naming Convention Examples Model Height Type Offset WW150K50 150mm Kinked 50mm WW200G75 200mm Gooseneck 75mm Note: Adding an extension with an offset to a Winwing base will most likely require the use of heavier springs and for the larger extensions >175mm may require 2 springs on the forward backward axis to keep the stick centered. IMPORTANT - Installation Instructions (scan the barcode on the packaging to get a copy of these instructions): Please watch the video before purchase. By purchasing this extension you agree that you understand the installation process. Installation Video Video will open in a new window Using the eBay App? Paste link into a browser window: [isdntekvideo] Note: This item is 3D printed. There will be obvious print lines on this product due to the nature of 3D printing. The colour of the base interface, plug and socket holder (not visible once installed) will vary depending on model chosen. We have colour coded them to make sure we send you the right one!